Cast Bullet Association Blog Atom Feed2024-03-19T01:15:06ZCast Bullet Associationchefreiss@gmail.comhttp://castbulletassoc.org/blog/atom1_.aspxWater Dropping Cast Bullets Made Easyhttp://castbulletassoc.org/blog/article/2017/11/126/water-dropping-cast-bullets-made-easy2017-11-28T07:59:52Z This article written by Karl Bosselmann, appeared in the Mar/Apr 2000, #144 issue of the Fouling Shot. Regrettably many modern-day shooters and hunters don’t realize that optimum-quality cast bullet....Cast Bullet Performance on Gamehttp://castbulletassoc.org/blog/article/2017/11/125/cast-bullet-performance-on-game2017-11-23T07:23:38Z This article by Terry N. McArthur, appeared in Fouling Shot #145, May/June 2000. There is no way in this day and age that the average person can become an expert on bullet performance, but I have hu....The Lyman-Pope 308403http://castbulletassoc.org/blog/article/2017/11/124/the-lyman-pope-3084032017-11-18T07:08:09Z This article by Joe Brennan appeared in the Mar/Apr 2006, #180 issue of the Fouling Shot.This bullet was originally the Lyman 308403, and later the number was changed to 311403. According to Rudi Pr....Adequate Accuracy Is Attainable With Simple Techniqueshttp://castbulletassoc.org/blog/article/2017/11/123/adequate-accuracy-is-attainable-with-simple-techniques2017-11-19T08:32:08Z This "Speaking Frankly" article written by Frank Marshall, Jr., first appeared in Fouling Shot #161, Jan/Feb of 2003.Target shooters are preoccupied in their quest for sub-m.o.a. cast bullet accurac....Cast Bullet Expansion, One Method that Didn't Work and One Feature that Didhttp://castbulletassoc.org/blog/article/2017/11/122/cast-bullet-expansion,-one-method-that-didn't-work-and--one-feature-that-did2017-11-07T07:04:34Z This article appearing in Fouling Shot #203 of Jan/Feb 2010, was written by Ralph Schneider.Back when I was first getting interested in hunting deer with cast bullets in the .45-70 cartridge, I thou....$25 Vent Hood for Castinghttp://castbulletassoc.org/blog/article/2017/11/121/$25-vent-hood-for-casting2017-11-03T06:04:44Z Written by Jim Rothel, this article appeared in the Mar/Apr 2012, #216 issue of the Fouling Shot. After tiring from years of toting my casting equipment to the garage for bullet casting sessions, I ....