Finally dug my old ML double out of the safe , I had thought for some reason the thing was made in London , but it turns out it's marked “MACFARLANE NEW YORK” . I don't have my choke gauge here but I will check them tommorrow at the shop . Looked down the barrels with a bore lite and the darn things look clean and pit free . Little dusty of course . Took the pin out and tried to remove the barrels as they appear to be hooked breech but they're tight . I'll try again at the shop tommorrow when I have a plastic headed persuader (hammer) .
The pics were taken with my I Phone so they aren't the best . But give a slight idea non the less . Oh the locks snap into cock just like a new sidelock would today , very positive half cock and full cock .
MacFarlane 10 gauge side by side muzzle loader
- 4.4K Views
- Last Post 05 July 2016
Attached Files
Loading birdshot for this thing is of no issue . But I've been thinking of a way to load the buckshot nested as I do in shot shells and make it relatively quick to get in the gun in the field . I am thinking eight 000 pellets should be a good load with 85 grains of Triple 7 2Fg or 2Fg Goex BP . 85 grains powder followed by an over powder wad followed by a cushion wad followed by perhaps the eight pellets held together with plastic wrap and finally an overshot wad . Dunno if this will work but it won't cost that much to try , well that is if the plastic wrap holds them together well enough for my purpose . I am sure pushing out the barrel when fired will make darn sure the stuff is shredded . I also read somewhere a fellow said he used dime wrappers for this purpose in a 12 gauge so I might try nickel wrappers in this 10 gauge !
Attached Files
The underside of the barrels !
Attached Files
Got an order from Midway today and there were a few things on the order for me !
200 over shot , 200 over powder and 200 cushion wads for my MacFarlane 10 gauge muzzle loader .
Attached Files
This project kinda screeched to a halt . But I have a pound of Triple 7 2Fg coming this week so perhaps I can have this one going before dove season . Would like to kill a pair of dove and maybe a deer this year with the old gun ounce and a quarter of 9's should work for dove and 9-12 000 buck should do the same for deer with about 90 grains by volume of Triple 7 .
Attached Files
I'll see this weekend if I can't make myself a shot dipper that will hold 1 1/8 ounce of shot and maybe another dipper for 90 grains by volume of powder .
Attached Files
Like everything else this year or so it seems , I've yet to shoot this gun . Perhaps next week ! Kinda sounds like a broken record .
Attached Files
Well yesterday after dinner I finally got the old gun out . Popped a couple caps on both nipples , then loaded 85 grains by volume of Triple 7 2 Fg followed by an over powder wad followed by a cushion wad followed by 1 1/8 ounces of shot followed b y a over shot card . Slapped a #11 on the nipple , shouldered the g u n and let fly . And very pleasingly it went BOOM ! Repeated t he process in the left barrel and again the wanted boom . After that I cleaned it and will try and pattern it with 000 Buck in the next day or so .
Attached Files
Went to the range after dinner last evening and tried this bad boy with 000 . Used 80 and 90 grain charges of 777 . Tried 9 and 12 pellets in nickel wrappers and without wrappers . Suffice to say 80 grains with 9 pellets worked best . But I need to make a die to cut over shot wads as the ones I got are a red CR or two to small. Need to get the top wad problem fixed and also run it over the Chrony . If velocity is over 1100 I am done !
Attached Files
Made a punch to cut larger diameter over shot wads . Cut some from the cardboard of Pepsi drink can containers . They were tight going down and packed well . However after shooting the firdt barrel the second still got a little loose . Maybe need to try a thicker or heavier material !
Attached Files
I might also try tamping them a bit more with a small plastic hammer or piece of wood . Might nit be getting them as tight as need be with just the ramped and my hand .
Attached Files
Bid on an original powder and shot measure today . Hopefully I can get it .
Attached Files
Thanks for posting. Lovely gun. I have a gang mold for 00 if you'd like to try.
73 de KE4SKY In Home Mix We Trust From the Home of Ed's Red in "Almost Heaven" West Virginia
Attached Files
Thanks for posting. Lovely gun. I have a gang mold for 00 if you'd like to try.
Thanks for the offer !
But I have a friend thats got the Lee 00 gang mold thats offerred it as well and he lives about 5 miles away .
But to be honest I already have about 10 pounds of Hornady 00 , 20 pounds Remington 000 and 10 pounds reclaimed 0 to last me awhile .
I might need to buy some #1 before to long , I started out using that in just the 16 gauge guns but have since found that all my 10 gauge breech loaders like it . And I suspect if I tried it in my 12's they might like it as well .
Now I'll be the first to say I try and keep wat more stuff then a sane person really needs or can use . And with that being said I like to keep 000 , 00 , 0 , 1 and 3 buck on my shelf . I have several friends that swear by #4 buck for all their deer/buckshot needs and while it may work very well for them I was never overly impressed with it atleast from my patterning tests .
Attached Files
Got the overshot card wad thing worked out Friday ! I got some of the used work order cards from the gunshop and used my wad punch to cut a bunch . Anyway two of those stiff card wads seem to do the trick . I loaded 000 in the left barrel and birdshot in the right . I fired the birdshot and checked the left barrel which seemed to be tight . Then I loaded 000 in the right barrel and fired it at my pattern board . Shook the gun and heard no shot rattle so I proceded to fire the left barrel at the pattern board . Put 16 out of the 18 pellets from the two barrels on my pattern board at 25 yards . So the next thing on the agenda is to kill a deer with the buck load and some squirrels and dove with the bird shot load .
Attached Files
Got a shot powder measure for the MacFarlane today !
Attached Files
Tried some .770” 730 grain slugs in the Macfarlane yesterday with 70 and 80 grains of Triple 7 granulated 2Fg at 25 yards . The 70 grain by volume loads weren't so great but the 80 grains by volume was pretty decent or so I thought !
Attached Files
Well the .780” 730 grain mold for full bore 10 gauge slugs is on it's way to me . And a friend gave me another 20 pounds of pure lead so I can make about 40+ pounds of these slugs for future use !
Attached Files
Categories
- All Categories
- General Polls
- Contact Us w/ Forum Issues
- Welcome to The Cast Bullet Association Forum
- General
- Bullet Casting
-
Guns and Shooting
- AR Platform
- TC Contenders & Other Single Shot Handguns
- Shotguns
- Informal Matches & Other Shooting Events
- Gunsmithing Tips
- Gun Cleaning & Maintenance
- Optics
- Benchrest Cast Bullet Shooting
- Military Bench Rest Cast Bullet Shooting
- Silhouette Shooting
- Postal Match Cast Bullet Shooting
- Factory Guns
- Black Powder Cartridge
- Hand Guns
- Lever Guns
- Single Shot Rifles
- Bolt Action Rifles
- Military Surplus Rifles
- Plinkers Hollow
- Muzzleloaders
- Hunting
- Reloading
- Buy, Sell or Trade
- Other Information & Reference
Search
This Weeks High Earners
- pat i. 34
- Aaron 32
- RicinYakima 21
- Wilderness 18
- Pigslayer 17
- SkinnerD 16
- linoww 15
- MP1886 13
- Bud Hyett 10
- Ken Campbell Iowa 8