Anyone have experience with the 196gn MX2-30H mould? I'm considering trying one in an 03-A3 with a bit of a worn throat. It looks like it was designed by a carpenter rather than an artist but the guy at NOE said some folks have had good luck using it as a target bullet, others not so much. Also considering since I can't seem to ever get in line when he has the 314-202 in stock:dunce:
John Carlson. CBA Director of Military Competition.
Attached Files
Not much out there for a .314” between 160 gr and 202 gr. I'm considering the Accurate 31-188G with the bands increased to .314".
Attached Files
I have thoroughly enjoyed it in the .310 version in .300 BLK OUT in the AR. I've meant to try it PB in some of the other guns. I don't see any reason why it would not work well.
Attached Files
Not much out there for a .314” between 160 gr and 202 gr. I'm considering the Accurate 31-188G with the bands increased to .314".
The designer of this one reports great results in all of his Mosin Nagants. http://www.accuratemolds.com/bulletdetail.php?bullet=31-190G-D.png
Attached Files
wimilkman
28
pat i.
18
Tom Acheson
14
Aaron
12
BRatigan
10
MarkinEllensburg
9
Ed Harris
8
mashburn
6
porthos
5
MP1886
4
