2026-09-25T01:04:47ZCast Bullet Associationchefreiss@gmail.comhttp://castbulletassoc.org/blog/atom1_.aspxhttp://castbulletassoc.org/blog/article/2017/10/120/some-old-marlins2017-10-27T12:37:04Z

This article appearing in the Sept/Oct 2010, #207 of the Fouling Shot was written by Craig Thompson.It all started when I read an article that Forrest Asmus had written about rebarreling a Marlin Mo....

http://castbulletassoc.org/blog/article/2017/10/118/a-low-cost-shooting-tunnel-part-3,-maintenance2017-10-24T12:47:44Z

This article written by John Alexander, appeared in the May/June 2012, #217 issue of the Fouling Shot. Since the tunnel was finished I have fired thousands of rounds through it and measured the muzz....

http://castbulletassoc.org/blog/article/2017/10/117/a-worthwhile-project?2017-10-22T01:38:54Z

This article written by Gordon Meeder, appeared in the Sept/Oct 2012, #219 issue of the Fouling Shot.Looking around one will find a lot of old Colt Police Positive revolvers that, to say the least, ....

http://castbulletassoc.org/blog/article/2017/10/116/rough-but-ready,-35-552017-10-18T11:29:54Z

This "Speaking Frankly" article appeared in the July/Aug 2013, #224 issue of the Fouling Shot.(Editor’s Note: Frank Washam has graciously agreed to come out of retirement and edit these newly acqui....

http://castbulletassoc.org/blog/article/2017/10/115/a-low-cost-shooting-tunnel-part-2,-operation2017-10-14T03:01:26Z

Part 2 of 3, of John Alexander's artilce was published in the Mar/Apr 2012, #216 issue of the Fouling Shot. Once the tunnel had been constructed and backfilled with the shed, target frame an....

http://castbulletassoc.org/blog/article/2017/10/114/a-.41-swiss-h-and-r-handi-rifle2017-10-10T07:57:28Z

Written by James Stuart, this article appeared in the Sept/Oct 2009. #201 issue of the Fouling Shot. While reading the article by Joe Weist in Fouling Shot #187, on the 41 Swiss I got to thinking ab....

http://castbulletassoc.org/blog/article/2017/10/113/a-low-cost-shooting-tunnel-part-1,-construction2017-10-07T10:54:11Z

Here is part one of a three part article that appeared first in the Jan/Feb 2012. #215 issue of the Fouling Shot, written by CBA President John Alexander. Shortly after arriving in Maine we moved in....

http://castbulletassoc.org/blog/article/2017/10/112/wrinkled-bullets-and-accuracy2017-10-05T02:13:20Z

CBA President, John Alexander, wrote this article appearing in the Sept/Oct 2011, #213 issue of the Fouling Shot.Over the years I have often wondered how picky I should be when inspecting a freshly ....