Cast Bullet Association Blog Atom Feed2026-09-25T12:16:49ZCast Bullet Associationchefreiss@gmail.comhttp://castbulletassoc.org/blog/atom1_.aspxThe .35 Remington as a Bench Cartridgehttp://castbulletassoc.org/blog/article/2018/10/150/the-.35-remington-as-a-bench-cartridge2018-11-01T06:18:15Z This article written by Joe Weist appeared in the May/June 2002, #157 issue of the Fouling Shot.In a discussion with Tom Gray once he mentioned that he thought the .35 Remington should make agood....The Medium Bores are Best for Cast Bullet Buck Bustinghttp://castbulletassoc.org/blog/article/2018/10/149/the-medium-bores-are-best-for-cast-bullet-buck-busting2018-10-27T10:42:45Z (Editor’s Note; The following originally appeared in The Fouling Shot #23, December 1979. and was written by Frank Marshall)The ability of medium bore bullets of 200 grains and more to penetrate hea....Some Data Regarding Barrel Bores and Handloading Cast Bulletshttp://castbulletassoc.org/blog/article/2018/10/146/some-data-regarding-barrel-bores-and-handloading-cast--bullets2018-10-21T05:31:48Z Some Data Regarding Barrel Bores & Handloading Cast Bullets by Karl Bosselman Slug that bore!It’s hard to over emphasize the importance of knowing the exact rifling groove diameter of your b....