2026-09-25T12:17:03ZCast Bullet Associationchefreiss@gmail.comhttp://castbulletassoc.org/blog/atom1_.aspxhttp://castbulletassoc.org/blog/article/2020/10/212/energy-is-only-part-of-the-equation.2020-10-19T11:16:04Z

By Jeff Brown. Many years ago I had a .22RF Martini action rifle converted to centrefire and rebarreled to .32-20 (click here for the article). In short, the reason for the build was t....

http://castbulletassoc.org/blog/article/2020/10/209/dad's-old-kerosene-stove.2020-10-18T10:13:18Z

By Jeff BrownI like to brew up batches of lead alloy for my bullet casting sufficiently large that I can rely on a decent degree of consistency in my projectiles over a reasonable run of casting. I....

http://castbulletassoc.org/blog/article/2020/10/208/drilled-flash-hole-high-pressure-test;-308-win.2020-10-06T10:52:01Z

Excerpt from Fouling Shot 267 By Larry Gibson In the past I have posted this explanation of why I drill out flash holes for use with low end reduced loads: "I shoot many thousands of squib loads in....