2026-09-25T12:16:47ZCast Bullet Associationchefreiss@gmail.comhttp://castbulletassoc.org/blog/atom1_.aspxhttp://castbulletassoc.org/blog/article/2017/1/39/retro-fitting-a-new-sprue-plate2017-01-28T03:44:41Z

This article was written by CBA member Jeff Brown, Christchurch, New Zealand and previously published on the website, Floyd Files - Complete Guide to Handloading. One size doesn’t fit all. I talk f....

http://castbulletassoc.org/blog/article/2017/1/38/cast-bullets-in-marlin-micro--groove-barrels2017-01-29T11:04:18Z

This article by By Mustafa Curtess of Austwell, TX, was published in the May/June #229 issue of The Fouling Shot. I have come to agree with Ed Harris that Micro-Groove barrels can shoot cast bullets....

http://castbulletassoc.org/blog/article/2017/1/37/re-visiting-.30-’06-“guard”-and-“gallery-practice”-loads-with-bullseye-powder2017-01-21T07:16:02Z

This article was published in The Fouling Shot #192, March / April 2008 Tales from the Back Creek Diary Re-visiting .30-’06 "Guard” and "Gallery Practice” Loads with Bullseye Powder By Ed Harris, A....

http://castbulletassoc.org/blog/article/2017/1/36/more-on-full-up-wadcutter-loads2017-01-15T09:44:01Z

This article written by Nick Croyle appeared in the March / April 2012 #216 issue of the Fouling Shot. In a trade with Ed Harris, I wound up with an unusual mold by Erik Ohlen (www.hollowpo....

http://castbulletassoc.org/blog/article/2017/1/33/membership-news2017-01-07T02:36:20Z

We continue to grow with a just over 1 per day average of new CBA members. For those of you not aware of it, we have a listing on eBay in the reloading "bullet molds" category. It ran for about two we....