2026-09-25T12:16:33ZCast Bullet Associationchefreiss@gmail.comhttp://castbulletassoc.org/blog/atom1_.aspxhttp://castbulletassoc.org/blog/article/2017/6/91/playing-with-the-colt-single-action2017-07-01T01:26:58Z

This article was written by CBA member, Tom Acheson and was published in the Mar/April 2003 #162 issue of the Fouling Shot. The path of my interest in handguns must have started off differently than....

http://castbulletassoc.org/blog/article/2017/6/90/it-must-have-been-the-bullet2017-06-28T10:28:27Z

Written by Bob Birmley Cimarron, NM & Photos by Doug Baribeau, this article appeared in the May/June, 2003 #163 issue of the Fouling Shot.You’re shooting for score in heavy class. It’s 100 ....

http://castbulletassoc.org/blog/article/2017/6/89/loading-for-the-7.62x54r-mosin-nagant2017-06-26T08:43:52Z

CBA member Dietrich Whitesides of Northglenn, CO wrote this article for the July/Aug 2002, #158 issue of the Fouling Shot. Several years ago, I allowed my membership in the CBA to expire and I have ....

http://castbulletassoc.org/blog/article/2017/6/88/shooting-the-8-mms2017-06-24T10:27:41Z

Shooting the 8mms by Joe Wiest Dubuque, IA, appeared in the Mar/Apr 2006, #180 issue of the Fouling Shot. The Yugo Model 43I never intended to get an 8MM but found a good deal on the web for a NEI32....

http://castbulletassoc.org/blog/article/2017/6/87/a-few-short--articles2017-06-21T03:06:03Z

Fitting Lee Sprue Plates by Mustafa CurtessAustwell, TX, Fitting the sprue plate on a Lee mould to fit niceand flat is simple and productive. I ordinarily cast with anew mould long enough to thoroug....

http://castbulletassoc.org/blog/article/2017/6/86/making-bullet-lube-molds2017-06-17T11:48:50Z

This article written by CBA member Ralph Schneider, appeared in the Jan/Feb 2003, #161 issue of the Fouling Shot.Those of us who experiment with cast bullet lubricants can often do preliminary testi....

http://castbulletassoc.org/blog/article/2017/6/84/38-colt-new-police-can-killer2017-06-15T05:24:50Z

This article written by CBA member Gordon Meeder, was published in the Mar/Apr 2011, #210 issue of the Fouling Shot.I just had to have a Colt Police Positive to add to my modest collection of Colt s....

http://castbulletassoc.org/blog/article/2017/6/83/sizing-cast-bullets2017-06-09T08:40:07Z

This article written by CBA member Pat Ifland was published in the Sept/Oct 2007 #189 issue of the Fouling Shot.In my opinion the best and least appreciated tool for sizing bullets is the Lee Push T....

http://castbulletassoc.org/blog/article/2017/6/82/casting-heaven-......-and-back-to-earth2017-06-06T09:36:31Z

Experiments in Inert Gas Casting by Steven F. Hurst, Tucker, GA was published in the #163 May/June 2003 issue of the Fouling Shot.The research lab I was working in had an assortment of controlled at....