2026-09-25T12:10:12ZCast Bullet Associationchefreiss@gmail.comhttp://castbulletassoc.org/blog/atom1_.aspxhttp://castbulletassoc.org/blog/article/2017/7/101/the-.32-winchester-centerfire-part-22017-07-30T11:29:54Z

Part two of Ric Bowman's article published in the Nov/Dec 2009 #202 issue of the Fouling Shot. My thoughts on reloading cast bullets for the 32/20This cartridge has been one of my favorites ....

http://castbulletassoc.org/blog/article/2017/7/100/the-.32-winchester-centerfire2017-07-30T10:51:58Z

This article is written by CBA member, Ric Bowman, and was published in the Sept/Oct 2009, #201 issue of the Fouling Shot. It started in 1882. One hundred years ago, one of the mos....

http://castbulletassoc.org/blog/article/2017/7/99/the-.50x502017-07-24T09:52:42Z

This article appearing in the Sept/Oct 2004 #171 issue of the Fouling Shot, was written by Rupert Wyble of Fallon, NV. I wanted .50-90 performance without black pow­der and at a price that wouldn&am....

http://castbulletassoc.org/blog/article/2017/7/98/a-winchester-.35-.30-302017-07-23T05:45:39Z

This article written by CBA member, Ed Harris, appeared in the Sept/Oct 2012 #219 issue of the Fouling Shot.A year or so ago I acquired a very much-used 1894 Winchester .30-30 with a shot out barre....

http://castbulletassoc.org/blog/article/2017/7/97/9.3-x-57-mauser-loads2017-07-19T05:08:33Z

Written by CBA member Jim Scearcy, this article was published in the Sept/Oct 2010 #207 issue of the Fouling Shot. A few months ago, on a cold winter Saturday morn-ing, I was sitting at the kitchen ....

http://castbulletassoc.org/blog/article/2017/7/96/undersized-moulds?-then-beagle2017-07-16T09:50:03Z

This article, written by James S. Knowlson, was published in the May/June 2010 #205 issue of the Fouling Shot.Beagling a mould to cast bigger bullets is a great idea from John Goins, a.k.a. “Beagle”....

http://castbulletassoc.org/blog/article/2017/7/95/the-.45-auto-rim2017-07-12T08:36:42Z

Appearing in the Jan/Feb 2008 #191 issue of the Fouling Shot, this article was written by CBA member Ric Bowman. There really isn’t a reason that the .45 Auto Rim gets so much ink used on it for sho....

http://castbulletassoc.org/blog/article/2017/7/94/a-.30-30-wesson-rolling-block2017-07-09T06:42:05Z

This article written by Mustafa Curtess appeared in the July/Aug 2000 #146 issue of the Fouling Shot. (Info on .30-30 Wesson cartridge found here) On the drive home from the ....

http://castbulletassoc.org/blog/article/2017/7/93/a-revolver-accuracy-primer2017-07-07T03:41:21Z

Written by Norman F. Johnson, this article appeared in the May/June 1996 #121 issue of the Fouling Shot. In a revolver, the throats are the areas in each cylinder chamber immediately ahead of the po....

http://castbulletassoc.org/blog/article/2017/7/92/loading-cast-bullets-in-the-9mm-luger2017-07-04T07:29:12Z

Written by Steve Tucker, this article appeared in the Nov/Dec 1999 #142, issue of the Fouling Shot.The 9mm Luger has a reputation for mediocre accuracy with jacketed bullets and a worse reputation ....