2026-09-25T12:10:14ZCast Bullet Associationchefreiss@gmail.comhttp://castbulletassoc.org/blog/atom1_.aspxhttp://castbulletassoc.org/blog/article/2017/8/107/some-additional-remarks-regarding-accuracy2017-08-23T12:05:52Z

This article appeared in the July/Aug 2005, #176 issue of the Fouling Shot and was written by CBA member, Karl Bosselman.Occasionally letters arrive to me and magazine articlescontinue to be publish....

http://castbulletassoc.org/blog/article/2017/8/106/cast-bullets-turn-the-.32-acp-into-a-bunny-buster2017-08-20T05:10:07Z

* - Editor's note: due to the original formatting of the load data table, it was omitted from this reprinting. This article was written by CBA member Ed Harris and appeared in the March/Apr....

http://castbulletassoc.org/blog/article/2017/8/105/working-up-.22-hornet-plain-base-loads2017-08-17T02:51:08Z

This article written by CBA member, Grant Macomber of Applegate, CA was published in the May / June 2008 #193 issue of the Fouling Shot. The objective of this project was to increase ....

http://castbulletassoc.org/blog/article/2017/8/104/the-.32-long-colt-project2017-08-11T09:32:30Z

This article written by CBA member, Bradley C. Bish, was published in the Sept/Oct 2001 #153 issue of the Fouling Shot. From the Sunflower State to the Keystone State, from my great uncle, to my gra....

http://castbulletassoc.org/blog/article/2017/8/103/the-.45-70-short-1.5752017-08-06T07:00:21Z

This article written by CBA member, Rupert Wyble, was published in the Jan/Feb 2005 #173 issue of the Fouling Shot.Shooting cast bullets in the .45-70 at black powder velocities has always been an e....

http://castbulletassoc.org/blog/article/2017/8/102/the-.416-x-.300-project-rifle2017-08-03T10:06:49Z

Appearing in issue #175, May/June 2005 of the Fouling Shot, this article was written by CBA member, Ken Ewing. I started casting bullets when I was in my early 20’s, self taught at first, and they....