I'm putting together a short 788 for my wife. I need a recoil lug. No find'um. The 700 lug has a .062” larger hole for the tenon. Can I have my smith turn this bit of the tenon to fit the 700's lug? Do one of you fine hoarders have a 788 lug? Thanks in advance, Dane.
Rem. 788 recoil lug
- 978 Views
- Last Post 10 December 2015
donr308
posted this
10 December 2015
Check this out, Numrich calls it a barrel bracket https://www.gunpartscorp.com/Products/806720.htm & its $5.95 Don Ross
Attached Files
Bud Hyett
posted this
10 December 2015
I have two Remington 788's which are barreled with custom thicker barrel lugs.
I think both gunsmiths bought an undersized lug from Brownell's or David Tubb and bored the hole to fit.
Otherwise, the Numrich Arms deal will be the best.
Farm boy from Illinois, living in the magical Pacific Northwest
Attached Files
delmarskid1
posted this
10 December 2015
Check this out, Numrich calls it a barrel bracket
Thanks donr, It's on the menu. 5.95 and 4.95 shipping.
Attached Files
Categories
- All Categories
- General Polls
- Contact Us w/ Forum Issues
- Welcome to The Cast Bullet Association Forum
- General
- Bullet Casting
-
Guns and Shooting
- AR Platform
- TC Contenders & Other Single Shot Handguns
- Shotguns
- Informal Matches & Other Shooting Events
- Gunsmithing Tips
- Gun Cleaning & Maintenance
- Optics
- Benchrest Cast Bullet Shooting
- Military Bench Rest Cast Bullet Shooting
- Silhouette Shooting
- Postal Match Cast Bullet Shooting
- Factory Guns
- Black Powder Cartridge
- Hand Guns
- Lever Guns
- Single Shot Rifles
- Bolt Action Rifles
- Military Surplus Rifles
- Plinkers Hollow
- Muzzleloaders
- Hunting
- Reloading
- Buy, Sell or Trade
- Other Information & Reference
Search
This Weeks High Earners
- pat i. 38
- Aaron 32
- RicinYakima 21
- Pigslayer 19
- Wilderness 19
- SkinnerD 16
- linoww 15
- MP1886 13
- stevebarrett 10
- Bud Hyett 10