350 Legend cast bullet sizes

  • 1.6K Views
  • Last Post 20 July 2020
  • Topic Is Solved
WoodencrossIII posted this 19 July 2020

Hey I’m just wondering if I can buy a 357 mold and use it for making bullets for my legend also now the legend is a .355 bore. Would sizing these thru a 356 sizer be just fine and is there any molds that could make 180 gr bullets that will work for the legend. Thanks again.

Attached Files

  • Liked by
  • Millelacs
Order By: Standard | Newest | Votes
Wheel Weights posted this 19 July 2020

Given all the conflicting info on this cartridge all over the net, I would slug the bore and go 2 thou over.

Check NOE and Accurate for a 180 mold.

Attached Files

  • Liked by
  • WoodencrossIII
  • malar
Bud Hyett posted this 20 July 2020

Several molds I used in .357 Herrett and .35 Remington:

  • RCBS 35-200-FN
  • RCBS 357-180-SIL
  • SAECO #352 (245 gran FNGC)

I was sizing .359 as they came from the mold for the .35 Remington and .358 for the .357 Herrett. 

I sent a visiting Florida native friend home from here with about 1,000 of the RCBS 200 grain and the SAECO 245 grain for his .35 Remington. A few years later, he called and needed some more bullets. Seems these cast bullets in that cartridge were good "gator medicine", permanently tamed them on the spot.

Farm boy from Illinois, living in the magical Pacific Northwest

Attached Files

  • Liked by
  • WoodencrossIII
  • Spindrift
Categories
Search
Popular Tags
This Weeks High Earners
Hot Topics
Close