Some time back I barreled a Mauser 93 in 7.62x39 . The extractor is a bit short . I tried relieving the extractor a bit on the inside so it would grab the rim but still not quite reliable and I dont want to go to thin and have it break off . The loaded rounds dont cycle real well as magazine is longer than the cartridges by quite a bit.
Im looking for suggestions from anyone that has built one of these on a mauser and how they solved this little annoyance . Im anxious to try this critter out the bullet nose fits the bore perfect just scratching uniformly against lands ! I have 20 loaded up with 16grs. of IMR 4227 .:fire