Loading the 300 Savage

  • 2.5K Views
  • Last Post 05 July 2011
mrdante posted this 13 December 2010

Does anyone load the 300 Savage. I just got a 1941 Savage 99 in 300 savage. I have a lee 180gr mold and a RD 165. Both are gas checked. Any advise or favorite/pet loads are welcome.

Attached Files

Order By: Standard | Newest | Votes
99 Strajght posted this 13 December 2010

Shot a deer last year with mine. Lee 180, 33 gr. 4895. 33 gr 3031 works well also.

Attached Files

tturner53 posted this 13 December 2010

Mr. D, I missed your first post, welcome to the forum. I'm interested in what you come up with as I will soon be helping a friend load cbs in the same gun you have. He bought it on my advice so I must make good. My readings so far have mentioned the short neck as a negative. They are beautiful guns, I'd like to have an old one in .303 Savage.

Attached Files

mrdante posted this 13 December 2010

I'll post some pics (when it comes in) on the levergun forums.

Attached Files

Muskrat Mike posted this 13 December 2010

For target, plinking, and plates my Savage 99 in .300savage just loves the Lee C309 150F with 15.0 gr. of SR4759 loaded with an OAL of 2.47.  It's very accurate at 100 yards and very pleasant to shoot.

Mike

Muskrat Mike

Attached Files

mrdante posted this 14 December 2010

Thanks Mike I've been eye-balling that mold on Midway I think I'll order one up. I also have a Lee 309-113 mold. Is this too lite.

Attached Files

Muskrat Mike posted this 14 December 2010

Additionally, the bullets are sized in a Lee sizer of .309 to seat the gas check and size it and then Tumble lubed.  They look funny seated at the 2.47 but they work and are accurate and no leading for me anyway.  i hope they work as well for your gun!

Mike

Muskrat Mike

Attached Files

res45 posted this 17 December 2010

One of my favorite loads in my Sav. 99 in 300 Sav. is converted once fired LC X51 brass to 300 Sav. topped with the Lee .312 155 gr. GC bullet sized to .310 and pushed with 16.0 grs. of Alliant 2400.   I also like the Lee 309 150 gr. FN bullet in same case and load.

Both Loads shoot under 1” at 50 yds.

'Artisan' in Lead, Brass & Powder.

Attached Files

mrdante posted this 18 December 2010

I was talking to someone this weekend at a gun show about forming 300 Savage from 308 Winchester. I have plenty of Savage brass but the knowledge might be handy one day. Anyone here ever done this? What is “x51” was this the experimental loads?

Attached Files

res45 posted this 18 December 2010

Sorry X51 is Military surplus Lake City 7.62 x 51 brass I reform into 300 Sav. brass. The brass is much thicker of course than standard 308 brass so case capacity will be lower but the 16.0 grs. of 2400 I use is  nowhere near a Max load in the Military case and pressure is not an issue. 

'Artisan' in Lead, Brass & Powder.

Attached Files

TRKakaCatWhisperer posted this 19 December 2010

Thanks for the load info! I have an 1899 (takedown circa 1926) I need to exercise.

Attached Files

Savage99 posted this 03 July 2011

I have a couple of 300's myself, let me know what you come up with. I haven't got around to reloading mine yet.

Attached Files

TRKakaCatWhisperer posted this 05 July 2011

TRK wrote: Thanks for the load info! I have an 1899 (takedown circa 1926) I need to exercise.

Thanks, SAV99 for bringing this up to the top - I STILL NEED to do it!

 

 

Attached Files

Close