After all the inquiries I've made about John Ardito rifles and what they like to shoot, I have finally found a tapered bullet based on an Eagan bullet design. It fits the tapered throat of my rifle and consistency is much better. It's the 31-190J mold by Accurate Molds. So if you have one of John's rifles with a tapered throat , I recommend this mold. It's getting me closer to John A.'s statement that he could build a half minute rifle for anybody. I'm averaging .7+ right now.
Found it !
- 271 Views
- Last Post 28 October 2020
- Topic Is Solved
hi Ross ... outstanding ! ...
your good results may force me to try to build an accurate rifle yet ... i have been feeing guilty about all the plinking fun i have been having for twenty years ... and then also i wonder if i could even shoot an inch group anymore ... ( heh ) ...
i have put you on my " HERO " list ... so keep us up on your further adventures ! ..
ken
Attached Files
when i had john audito build my rifle; it came with a eagan mold, rcbs press and a swaging die to swage the bullet to the same taper as the throat. i don't like the load at the bench process that john used. so, if i decide to shoot the gun again i will form 30 + brass and pre load at home. OR sell everything for $1700.00
Attached Files
I size my bullet at .312 which is just enough to put the gas check on and lube the gas check "gap". It also fills the start of the taper in the throat and still allows the nose to touch the riflings. Cast of 3lino to 1 ww. I use 21 gr. r-7 or 26 gr. of n135 in the 308x1.625 case. Standard caveat applies, my load my risk. I load 50 at a time at home, but I have some ardito style cases that came with the rifle I might try again, just for fun.
Attached Files
Categories
- All Categories
- General Polls
- Contact Us w/ Forum Issues
- Welcome to The Cast Bullet Association Forum
- General
- Bullet Casting
-
Guns and Shooting
- AR Platform
- TC Contenders & Other Single Shot Handguns
- Shotguns
- Informal Matches & Other Shooting Events
- Gunsmithing Tips
- Gun Cleaning & Maintenance
- Optics
- Benchrest Cast Bullet Shooting
- Military Bench Rest Cast Bullet Shooting
- Silhouette Shooting
- Postal Match Cast Bullet Shooting
- Factory Guns
- Black Powder Cartridge
- Hand Guns
- Lever Guns
- Single Shot Rifles
- Bolt Action Rifles
- Military Surplus Rifles
- Plinkers Hollow
- Muzzleloaders
- Hunting
- Reloading
- Buy, Sell or Trade
- Other Information & Reference
Search
This Weeks High Earners
- wimilkman 24
- pat i. 18
- Tom Acheson 13
- Aaron 10
- MarkinEllensburg 9
- Ed Harris 8
- mashburn 6
- porthos 5
- MP1886 4
- linoww 3