Primer Pocket Cleaning

  • 886 Views
  • Last Post 08 November 2020
Boschloper posted this 27 October 2020

I was loading some .30-30's this morning and got to wondering....  How and how often do you clean primer pockets?

I use a home made tool, a piece of 1/16 inch music wire sharpened to a point and held in a 3/16 inch diameter handle. 

I clean my rifle and revolver brass every time I load it. Semi auto pistol brass I don't clean.

Attached Files

Order By: Standard | Newest | Votes
Eutectic posted this 27 October 2020

I used to have large and small LEE primer pocket cleaners mounted vertically on my press. I religiously cleaned every pocket.
I stopped cleaning primer pockets when I detected no difference in 45 ACP and 38 Special match grade ammunition.
I have a wash step after sizing to remove the sizing lubricant, some of the primer residue is removed, but not all.

Many shooters load on progressive presses which have no way to clean primer pockets.
A local reloading manufacturer who turns out 100,000 rounds a week cleans not one primer pocket.

The short answer is NEVER.

Steve

Attached Files

  • Liked by
  • Bud Hyett
RicinYakima posted this 27 October 2020

Always for my match ammo, seldom for practice ammo and never for plinking stuff.

Attached Files

  • Liked by
  • Bud Hyett
Ross Smith posted this 27 October 2020

I clean when the primers are sticking out ever so slightly . I use a hand held primer tool not my rcbs rock crushing son of a gun.

Attached Files

  • Liked by
  • RicinYakima
  • Bud Hyett
Ken Campbell Iowa posted this 27 October 2020

when i wuz a farm boy i cut up those wooden trays the primers came in and scrubbed the primer pockets ....  

then i read that it didn't matter ...  might have been Warren Page ... ( he didn't clean pockets for his benchrest rifles . ) 

i haven't cleaned one in 40 years ...

********************

along that line, some of the current mj benchesters " uniform " their primer pockets with their nifty little carbide cutters every shot or so with their 85,000 psi loads ... the brass moves a little ...

ken

 

 

Attached Files

  • Liked by
  • Bud Hyett
Coydog posted this 27 October 2020

I clean my out of habit , I seen some build up on some. It works for me .

Attached Files

Dale53 posted this 27 October 2020

I was a competitive shooter for many, many years in various disciplines. After Warren Page (a renowned Bench rest  shooter and author) stopped cleaning primer pockets without issue, I quit, myself. I ran the usual tests and saw no difference in bench rest as well as big bore and pistol shooting. I haven't cleaned primer pockets since.

FWIW

Dale53

Attached Files

  • Liked by
  • Maven
  • Bud Hyett
John Alexander posted this 27 October 2020

I'm with Eutectic, Ken, and Dale.

After reading Page's article I tried strings of groups alternating with and without cleaned primer pockets and didn't get a difference. I haven't cleaned a primer pocket for a long time.

John

Attached Files

  • Liked by
  • Bud Hyett
Bud Hyett posted this 27 October 2020

I remember talking reloading to Jim Stekl at length at the Orlando NRA Annual Meeting. He reinforced Warren Page on primer pocket cleaning. My primer pocket cleaning tool is now rusty.

I mentioned building a 6X45 (6mm-.223 Remington). He said that Remington should have offered the 6X45 in place of the 6X47. The 6X47 was a mistake, over-length and not efficient for consistent powder burn. 

Farm boy from Illinois, living in the magical Pacific Northwest

Attached Files

Ross Smith posted this 28 October 2020

Think I'll quit too.

Attached Files

  • Liked by
  • Geargnasher
  • Bud Hyett
RicinYakima posted this 28 October 2020

Then what are you going to do between expanding the neck and seating primers? Listen to the radio?

Attached Files

  • Liked by
  • Bud Hyett
  • Dean D.
pisco posted this 28 October 2020

Even an old screw driver run around in the pocket will loosen things up

Attached Files

Michael S posted this 28 October 2020

  I clean the primer pockets every time after I de-prime them using the RCBS metal whisker looking thing, a small and large depending on caliber. I never look at the pocket to see if it has residue, doing that takes more time; it is time effective to simple twist every case on the appropriate whisker.

 

GOD, United States of America, US Marine Corps, Family, Self

Attached Files

lotech posted this 28 October 2020

I tried this and found it to be nothing more than busy work. However, it's probably not detrimental to accuracy or anything else if you like to clean primer pockets.  

Attached Files

  • Liked by
  • Bud Hyett
ALYMAN#1 posted this 28 October 2020

I usually clean primer pockets especially for AR brass to prevent high primers  I use a tool that I think Lyman made years ago similar to the old spin top starter.  I have 3 now 2 small and one large - I just put cases in a plastic block Primer pocket up and make a push in each pocket  and then dump to get rid of residue.  Will probably continue to do so until I wear out these little tools which have lasted for 50 + years.  FWIW 

Attached Files

porthos posted this 28 October 2020

life is too short to clean primer pockets

Attached Files

  • Liked by
  • RicinYakima
beltfed posted this 28 October 2020

Only primer pockets that get cleaned here are for cases from my BPCR rifles.

The tumbling with ceramic media does a great job of cleaning the cases in and out,

including the primer pockets

beltfed/arnie

Attached Files

  • Liked by
  • Bud Hyett
Ken Campbell Iowa posted this 28 October 2020

... if you want to add a little " pro " to your precision loads ....

i mentioned above the little carbide " pocket uniformer " cutters available from benchrest shooter suppliers ...

i have one in both small and large rifle pocket size ... i originally got these to remove crimps from military brass ... but find they occasionally remove something from commercial brass ... 

and yep, they add to the " spiffy " factor of your product.

***************

and i might add my favorite priming rig is the device on the top of my old bonanza press ... 

ken

Attached Files

Ross Smith posted this 28 October 2020

Can't listen to the radio, I'm deef.

Attached Files

gunarea posted this 30 October 2020

The residue left in the pocket and the residue expelled during decapping are measurable quantities. Thirty years ago I collected data to corroborate claims made from both sides of this disagreement. Too many variables to substantiate either view. Everyone is entitled to an opinion. Bottom line, if you want to know, ask the one who is leaving State tournament with the top award.

Shoot often, Shoot well

Attached Files

  • Liked by
  • RicinYakima
John Alexander posted this 31 October 2020

Sounds good, but what if the one with the top award also always shines his match cases with Brasso should you do that too.

Just because a winner does something doesn't mean it helps. Winners are human too and susceptible to blindly following erroneous rules just like most, especially if somebody has put them in print.

Many past top CB shooters always sized, lubed, and shot their bullets in the exact order cast.  

Early top CBA shooters, including John Ardito and David Lee thought it necessary to only use one case.

Many others followed along obediently because the winners were doing it.  But the shooters who thought for themselves shot better often enough without these two silly procedures and virtually nobody now bothers.

Be skeptical. It's more fun.

John

Attached Files

  • Liked by
  • RicinYakima
  • Geargnasher
Show More Posts
Close