Slug Gun build help

  • 294 Views
  • Last Post 01 July 2019
Seven Pines posted this 21 June 2019

Here I go with a project. I’m looking for two things: 1) in need of a under hammer slug gun action for a 1 1/8” or heavier barrel. I done have access to a mill or a shaper anymore and will need to buy one ready to go. 2) back in the 1970s “Rifle” magazine had an article called “Making and aligning a false muzzle”. I’d like to find a copy of the article. Any help would be appreciated. Thanks, Seven Pines

Attached Files

Order By: Standard | Newest | Votes
4060may posted this 22 June 2019

complete underhammer actions

http://www.longrifles-pr.com/actions.shtml

Attached Files

4060may posted this 22 June 2019

link to underhammer blog

http://underhammers.blogspot.com/

Attached Files

R. Dupraz posted this 22 June 2019

I know where there is a ML slug gun that was for sale a short time ago. The gunsmith that I frequent built it for himself some years ago and the last time that I talked to him he was looking to sell it. Don't know for sure but knowing Bob, the gun no doubt has a false muzzle and tools.

R. 

Attached Files

Oldman 1950 posted this 22 June 2019

Here I go with a project. I’m looking for two things: 1) in need of a under hammer slug gun action for a 1 1/8” or heavier barrel. I done have access to a mill or a shaper anymore and will need to buy one ready to go. 2) back in the 1970s “Rifle” magazine had an article called “Making and aligning a false muzzle”. I’d like to find a copy of the article. Any help would be appreciated. Thanks, Seven Pines

Any day you wake-up sucking air will be a good day

Attached Files

Oldman 1950 posted this 22 June 2019

If you would be interested in a Slug Gun that is ready to shoot with false muzzle and bullet molds for a two piece bullet contact me as I have one that I would be willing to sell.

This Gun has won many matches

 

A. J. Palik

aajj11@verizon.net

(571) 217-3380

Any day you wake-up sucking air will be a good day

Attached Files

Seven Pines posted this 01 July 2019

Project on hold until I get the washer and dryer paid off. Wife didn’t like grandmas old wash tub and wringer. Neither did I, but they worked for a week and a half.

Attached Files

Close