I just bedded my target rifle and I remembered a tip from my bamboo rod making days. Use vinegar to clean up after using epoxy. The stuuf winds up everywhere if I use it, so I need a non-toxic solvent, vinegar. It will dissolve epoxies that aren't set-up.On your hands the work bench and the stock or barrel and action. Vinegar on a paper towel or q-tip and some elbow grease will get it done.
- 643 Views
- Last Post 09 June 2020
- Topic Is Solved
A very good piece of information............. Thanks.
Yes, vinegar is a standard cleanup "solvent" after using Acraglas bedding compound.
and other epoxy based glues
That I did not know. Thanks..
David a. Cogburn
Boy I wish you had posted this last week. Does it take it out of shirts? I get that stuff everywhere. Thanks for the tip.
Ray: Only if it's still gooey. I might add that brake cleaner works if you are desperate.
Vinegar works pretty good as a clean up for silicone caulk before it sets. After it sets use a razor blade.
i use acetone. and a piece of copper works and it will not hurt the blueing. just don't use it on a satin or glass beaded finish, it will leave a copper smear
Also great for cleaning BP rifles Would it do anything to the barrel or the finish on the gun?or the brass?
Having used GALLONS of epoxy in building trad bows,we always used acetone. It's a little less "reactive" on the wood than vinegar virtue of it's quicker evap rate.
You definitely don't want to breath or handle uncured epoxy,very bad stuff. Grinding it once cured isn't quite as bad but should still be avoided through mainly,proper "dust" management(higher end$$ dust collection systems) but respirators are an expedient. Good luck with your project.
Coydog: Don't know. I used it on my stock just to clean the soft epoxy boogers BEFORE they set up. That was not a sopping wet application, just a moistend rag or qtip. .That was followed by dry rags and qtips.
I guess if you let nice shiny brass sit in the stuff it would antique it. Never tried it on my bpcr brass. The nice part is the non-toxic feature of vinegar.
- All Categories
- General Polls
- Contact Us w/ Forum Issues
- Welcome to The Cast Bullet Association Forum
- Bullet Casting
Guns & Shooting
- AR Platform
- TC Contenders & Other Single Shot Handguns
- Informal Matches & Other Shooting Events
- Gunsmithing Tips
- Gun Cleaning & Maintenance
- Benchrest Cast Bullet Shooting
- Military Bench Rest Cast Bullet Shooting
- Silhouette Shooting
- Postal Match Cast Bullet Shooting
- Factory Guns
- Black Powder Cartridge
- Hand Guns
- Lever Guns
- Single Shot Rifles
- Bolt Action Rifles
- Military Surplus Rifles
- Plinkers Hollow
- Buy, Sell or Trade
- Other Information & Reference