I just joined CBA and I have some questions
In the book I just recieved when joining I had read that in the section under cookbook loads for 30-06,when using IMR 4227,the low range of powder charge is only14 grs.I weighed that amount on my scale and it didn't look like alot of powder.
The author also stated that IMR4227 was not position sensitive.In the loading area he did not mention if he recomend a filler in keep the powder near the primer.Will this powder and weight charge work ok with out a filler?
I plan on starting a load with my 30-06 using this powder(as a starting point) with a lyman 311041 bullet sized .310 and using lyman super moly lube.I also have a lyman 311284 210 gr and a rcbs 308-165gr silhouette.Are any of these good for a start in beginning bench rest shooting.I don't think I will go to full blown bench rest,but just stick to production type class style
Are there other powders that anyone would recommend for these bullets and bore.I would like to stay close to 1600fps or less if possible
Thanks for any help or info
ubetcha