Does anyone make a duplicate or copy of the 30 cal Egan molds?
Egan mold copies
- 3.7K Views
- Last Post 29 November 2016
Group buy for a NOE version of Don's MX2-30-H is up on the NOE website, various sizes, .310, .314, .316. http://noebulletmolds.com/smf/index.php/topic,627.0.html
Attached Files
http://noebulletmolds.com/smf/index.php/topic,580.0.html
Interest thread at NOE forum for a run of the MX2-30-H
Attached Files
FYI the NOE versions are not nose pour. I have the MX3-62 gr -225 FN. It's a 3 cavity and produces very nice bullets. I just haven't got them under MOA yet, but I will. Next up is an H&R .22 K Hornet with a 9” twist.
Attached Files
I've often wondered why other mold makers don't make nosepour molds, especially when the bullet has a flat point. If the fellow who owns the cherry for the .303 version of Mr. Eagan's MX2-30-H would sell it, there would be someone selling copies of that design!
Attached Files
Colorado Shooter's Supply, Dave Farmer, offered to make the Egan mold styles. I've had good luck with his molds. I do not know if he is still offering, but contacting him is worth a try.
Farm boy from Illinois, living in the magical Pacific Northwest
Attached Files
NOE makes a clone of the SAECO #315 which is very much like an Eagan design. Its the .311” 175 gr FN-GC. See
Attached Files
Thanks for the info. Looks likks a new mold is in the works.
Attached Files
NOE have done a run of two different sizes.
http://noebulletmolds.com/NV/index.php?cPath=24&osCsid=t7171d114oldii17vhdume8tp3
Cheers from New Zealand
Attached Files
I have a accurate mold of Don's mx4-30ard in 4 cavity and they all cast within 1 grain. the moold is 310230E. he does fine work. Jim
Attached Files
You could try Accurate Moulds. I own two and they work great! One of them is a copy of a Lyman 375499, plain base. The other is a 4-cavity with 2 cavities of a copy of a H&G .45 SWC and the 2 are a copy of a H&G .38 full wadcutter. His catalog is on line and is extensive. I suspect he'll make anything you want. If you don't have Don's catalog with dimension drawings, let me know. Tom at Accurate will work from a drawing. Regards, Tom
Attached Files
Categories
- All Categories
- General Polls
- Contact Us w/ Forum Issues
- Welcome to The Cast Bullet Association Forum
- General
- Bullet Casting
-
Guns and Shooting
- AR Platform
- TC Contenders & Other Single Shot Handguns
- Shotguns
- Informal Matches & Other Shooting Events
- Gunsmithing Tips
- Gun Cleaning & Maintenance
- Optics
- Benchrest Cast Bullet Shooting
- Military Bench Rest Cast Bullet Shooting
- Silhouette Shooting
- Postal Match Cast Bullet Shooting
- Factory Guns
- Black Powder Cartridge
- Hand Guns
- Lever Guns
- Single Shot Rifles
- Bolt Action Rifles
- Military Surplus Rifles
- Plinkers Hollow
- Muzzleloaders
- Hunting
- Reloading
- Buy, Sell or Trade
- Other Information & Reference
Search
This Weeks High Earners
- John Carlson 22
- Bud Hyett 21
- linoww 17
- MP1886 13
- MarkinEllensburg 10
- drone 9
- Aaron 7
- beltfed 6
- Lucky1 6
- Eutectic 6