What is the most simple way to attach a photo to a post. I did it quite a few times on the old forum format. I've done a search but it was all related to the the old way.Thank you, Don Ross
Posting photos
- 806 Views
- Last Post 18 January 2016
Don: This is the method that I use wheather it's a reply to a post or a new topic. Click on either of the above to get the posting window. After the narrative, click on the browse box below the new post. My libraries window will be superimposed over my narrative in the posting forum window, Select the pictures library. scroll through until I find the photo that I want. These all have been previously downloaded from my digital or the net. Click on the photo to highlight and click on open in that window. The photo name will appear in the browse box back at the bottom of my reply post on the forum. Click on Post Reply Example
Attached Files
Thank you very much. This is 1st target shot after mounting receiver sight on my Marlin 1894 45 ACP conversion. Should suffice for a test run. Thanks again. Don
Attached Files
That's an interesting caliber and rifle. I wonder if a 9mm lever action is possible?
Attached Files
Very neat and nice shooting. Who did the work on the rifle? Is it picky about bullet shape or COL?
Eric
Attached Files
John Taylor was the gunsmith that did the conversion. The 2 loads that I'm using so far are the Lee 200 gr. clone of the H & G 68. The other is the Lee 230 gr. TC. I have 6 cavity molds for both and quality is very good. Here are 2 targets I short yesterday. Sun was low and to my right so 1st 5 with 230 and Tite Group were right so I made sight adj. There are at least 12 through X. Next one was 3.8 of VV N310. I did not foul barrel and 1st 2 were 1 o'clock. Next 8 were center group, slightly to right. Here are two targets. Not very good photo. Don
Attached Files
Didn't answer question. The 230 TC is loaded 1.200” and 68 clone is 1,25". The rifle is a real jewel and seems to shoot anything. The weak link is probably the shooter. I've thought about mounting a scope to see what lt will really do. Over the years I have put 1000's of rounds through target 45's and Ransom rests and I've never attained this degree of accuracy.
Attached Files
Mr. Taylor is a gifted gunsmith. Thanks for the details!
Eric
Attached Files
Categories
- All Categories
- General Polls
- Contact Us w/ Forum Issues
- Welcome to The Cast Bullet Association Forum
- General
- Bullet Casting
-
Guns and Shooting
- AR Platform
- TC Contenders & Other Single Shot Handguns
- Shotguns
- Informal Matches & Other Shooting Events
- Gunsmithing Tips
- Gun Cleaning & Maintenance
- Optics
- Benchrest Cast Bullet Shooting
- Military Bench Rest Cast Bullet Shooting
- Silhouette Shooting
- Postal Match Cast Bullet Shooting
- Factory Guns
- Black Powder Cartridge
- Hand Guns
- Lever Guns
- Single Shot Rifles
- Bolt Action Rifles
- Military Surplus Rifles
- Plinkers Hollow
- Muzzleloaders
- Hunting
- Reloading
- Buy, Sell or Trade
- Other Information & Reference
Search
This Weeks High Earners
- Eric B. 2