Opinions? www.shellshocktech.com This is interesting to me as a case design as they are working on a bottle neck rifle design. In my experience 9s don't stretch and these do require case lube. (also I have a five gallon bucket of 9 brass) 40+ reloads and magnet pick up would be good. If they get this ironed out for 308 cases I'd try them out. Gp
40+ reloads case design
- 251 Views
- Last Post 22 December 2017
Ken Campbell Iowa
posted this
22 December 2017
interesting ...
http://www.nxtbook.com/nxtbooks/nra/ssusa_201702/index.php#/14
Attached Files
Ken T
posted this
22 December 2017
There is an article about those in the current Hodgton reloading annual.They require special reloading dies.Normal dies tend to disassemble the cases.I won't be trying them.
Attached Files
GP Idaho
posted this
22 December 2017
Thanks for that link Ken C. that's the article I read that made me aware of these cases. Yes Ken T. I have the Hodgdon reloading manual with the article. Special dies yes about $90. Gp
Attached Files
Categories
- All Categories
- General Polls
- Contact Us w/ Forum Issues
- Welcome to The Cast Bullet Association Forum
- General
- Bullet Casting
-
Guns and Shooting
- AR Platform
- TC Contenders & Other Single Shot Handguns
- Shotguns
- Informal Matches & Other Shooting Events
- Gunsmithing Tips
- Gun Cleaning & Maintenance
- Optics
- Benchrest Cast Bullet Shooting
- Military Bench Rest Cast Bullet Shooting
- Silhouette Shooting
- Postal Match Cast Bullet Shooting
- Factory Guns
- Black Powder Cartridge
- Hand Guns
- Lever Guns
- Single Shot Rifles
- Bolt Action Rifles
- Military Surplus Rifles
- Plinkers Hollow
- Muzzleloaders
- Hunting
- Reloading
- Buy, Sell or Trade
- Other Information & Reference
Search
This Weeks High Earners
- John Carlson 22
- Bud Hyett 21
- linoww 17
- MP1886 13
- MarkinEllensburg 10
- drone 9
- Aaron 7
- beltfed 6
- Lucky1 6
- Eutectic 6