A 1951 Time Capsule - .35 Marlin Eye Candy

  • 11K Views
  • Last Post 14 November 2016
Ed Harris posted this 13 November 2011

Much of the pleasure in owning an old gun is in the memories it evokes of past hunts, days afield with Dad or Grandpa, or the historical era in which it was made. When buying a used rifle off the rack we seldom know who may have owned it or its particular history. But it is fun to imagine the game it may have seen, the places it has been and the tales it may have heard around many campfires. It is also rewarding to tinker with old rifles, removing the grime of years, curing the ills of old age, getting them zeroed, developing good loads that work, and putting them back to work in the deer woods. This rifle found in a local shop is a great example. The “H” letter code preceding its serial number indicates this Marlin 336 Sporter in .35 Remington was built in 1951. Its El Paso, Texas manufacture K2.5 Weaver scope and E.C. Herkner Co., Boise, ID “Echo” side mount are of the same period. The rifle is in 90 percent condition, having been lovingly cared for and apparently used little. If only it could talk? If anyone reading this has their own tales to tell about a .35 Remington Marlin, let's please hear them. If you have some other “fireside favorite,” either rifle or handgun, which either tells a story or makes you contemplate what might have been, please post pictures and share the eye candy! Fouling Shot Editor Glenn Latham and I were recently discussing ideas to encourage members to submit articles for The Fouling Shot. My favorite articles in the Gun Digest for years have been reader submissions under the category “One Good Gun.” So as not to steal their familiar tag line, “Fireside Favorites” will be ours. The concept will be similar, but with the emphasis, of course, on using cast bullets! So go to your hunting camp closet, pick your fireside favorite, and tell us about yours.

73 de KE4SKY In Home Mix We Trust From the Home of Ed's Red in "Almost Heaven" West Virginia

Attached Files

  • Liked by
  • M3 Mitch
Order By: Standard | Newest | Votes
Rodfac posted this 14 November 2016

Good to hear from you as well, Dale...it's been too long. Been busy here with a new to me, Smith M19 and working up loads for the deer season. That RCBS 35-200 is a hellofa bullet; easy to cast, the right size right out of the mold, and as accurate as I can hold any more...Rod

Attached Files

Dale53 posted this 14 November 2016

Rodfac; Good to see you again, my friend! That is a very nice buck, too!

Dale53

Attached Files

John F. posted this 14 November 2016

"I agree with what Ed said its a shame we don't know the history of some of the old used guns we buy. Too bad they didn't come with a log book."

Very true! I once had an 1894 SRC in .32 SPL built in the 'teens, that was in well-used, but very well-cared-for condition, original blue, varnish and perfect bore. It came with an original Lyman tang sight, and a folding barrel mounted sight with 2 blades. One had been crudely filed to a large “U” shape -- the opening was very large, almost semi-circular.

I couldn't understand the reasoning for this at first, because it had a horrible sight picture when looking through it at the front sight. Then, I stumbled across the real reason. With the tang sight flipped up, it very neatly fit over the cut-out “U” in the blade, which would have obstructed it, otherwise. It made using the peep sight effortless.

Flipping up the other blade on the barrel-mounted sight showed an excellent sight picture with the front sight, well-zeroed. So, it was like a little time-capsule, left in place for many decades by a previous owner, who obviously was a thinking-man's rifleman. I really appreciated the modification when I realized why it had been done, and the flexibility it brought to the SRC.
I would have loved to have met the previous owner and heard some of the rifle's exploits! As we say, “If only they could talk!”

John

Attached Files

  • Liked by
  • M3 Mitch
Rodfac posted this 14 November 2016

Good caliber and a great old rifle, Ed. I took my 2016 buck with one this am. Rifle (Marlin 336 in .35 Rem. gussied up with some checkering and a tung oil re-finish) built in 80, shooter built in 1946. I now need a 2.5x Leupold Alaskan of mid-80's vintage, and that helped as did RCBS's fine 200 gr FP bullet. My Marlin will do an honest 2” at 100 yds with lightly culled bullets, sized 0.360". Leading has not been an issue. I like SR4759 in charges from 18.0 to 19.0 grains for about 1600 fps. Incidentally, that same load and sizing works wonders in a Savage '99 Brush Gun in .358 Winchester.  This year's buck went 150+lbs, dressed, and the bullet broke two ribs coming and going...a clean through and through. Good blood trail, and he traveled 100 yds through KY timber before stacking up. I like the caliber, but do find that I need to keep careful setting of my sizing die to prevent ANY setback of the shoulder, other wise I get occasional FTF's. Here's the round. If I can get the pics to work. (2nd one has my 1894 .357 in it...picked up the wrong carbine when back at the jeep prior to field dressing and pic taking).  Rod <url=http://s261.photobucket.com/user/Rodfac/media/Rifles/P3231173.jpg.html>

Attached Files

2coldhere posted this 22 October 2016

I didn't see this post until it had ended, but here's my story on my heirloom 94 Win in .38-55 that my dad bought from his Uncle Otto in 1938 for $25. My brother and I used to get into his tool shed and play with it, as in dryfiring. One year a bear is walking thru the resort with customers around so he goes to get his trusty 94 to shoot it. In 1963 bears were only considered vermin. After 3 misfires he sees that the primers are not dented. He then got the 98 Mauser he brought back from the Battle on the Bulge and shot the bear. It was 40 years before we told him why the firing pin was broker in the 94. I think he was lucky the gun didn't go off as the factory ammo will only penetrate 2” of wet paper. He would have just tickled the bear enough to get a mauling.

Attached Files

  • Liked by
  • M3 Mitch
M3 Mitch posted this 20 October 2016

tturner53 wrote: Anybody shot an elk with a .35 Remington? Me and JR. are going to Washington for an elk hunt! He's thinking of taking my Marlin. Is the Hornady tipped bullet really better? We're expecting heavy cover, short range stuff. No first-hand experience, but I think if you use a good bullet and you hit the right place on the elk from short range, it should do fine.  I think the point of the Hornady plastic point bullets is better long range performance.

I have not used them, but these Hawk brand bullets look good, you might consider them any time you are stretching the capabilities of a smaller cartridge on bigger game:

http://hawkbullets.com/masterList.html

I would think the right cast bullet, preferably made of #2 Lyman alloy, ought to work fine as well. 

Attached Files

gunarea posted this 18 October 2016

Hey 35rs       My 336 is an original purchase made in 1972 at the request of my Dad. Although I was no longer a child living at my childhood home, when my Dad suggested me do something, I did it. This Marlin is a centennial complete with the medallion set into the stock. Being something special had nothing to do with my buying it. We hunted deer with 30-30s and bow. Hogs and bear required different equipment. On a hog hunt, my Dad was offered a shot with a friends 35 also in a Marlin.      Upon retirement, my biology teacher opened a sporting goods store in downtown Deland. As luck would have it, he got this centennial Marlin as part of his buy in package. While the rifle got a lot of curious attention, no one offered to take it home. I had been casting and reloading over 7 years now and figured to be able to make this thing work for me. Boy howdy does this rifle work and on everything in Florida. There is a post here at CBA which shows some of my 35 Rem loadings. From a 36 cal roundball, up to the legendary RCBS 200 gr. Yeah it's a micro groove but once you put that out of your thinking, it's also a tack driver. Somewhere in a box or sack or drawer or corner, is the original sling. The only change made to this outfit was putting quick release snaps on the sling. Literally hundreds of deer have been taken with this rifle and not a single wounded animal. Over forty years feeding my 35 cast bullets. What can you tell me??  Thanks for the trip back to many fireside evenings at camp.                                                                                     Roy  

Shoot often, Shoot well

Attached Files

  • Liked by
  • M3 Mitch
M3 Mitch posted this 17 October 2016

Not a .35 Remington, but my American Eagle .30 Luger. My grandpa had a .30 Luger when I was a kid. Anyway years later I found the .30 American Eagle and a “regular” 4” barrel 9mm to go with it, bought both of them from the same dealer at a show in Salt Lake City.

Anyway the .30 has taken very well to cast, I use the Lyman 93 grain bullet intended for the round. Offhand I can't remember the exact charge, but a moderate load of Unique, taken from the Lyman 45th handbook and/or the same vintage first Lyman Cast Bullet Handbook shoots accurately and cycles the action as it should.

While he was still around, my late Dad saw me hit beer cans out to about 40 yards with it. I remember telling him about in over the phone, and he asked “You mean 40 feet?” - no, I sez, 40 yards (Paced off, so maybe it was 38 yards - ) He was right proud of my shooting.

Later with a shooting girlfriend at a range, she took a few shots with the American Eagle. As you probably know, Lugers eject more or less straight up. Without going into non- PG-13 details, well endowed ladies should not shoot Lugers when wearing a low-cut top...

The .30 is largely a hand-load proposition, I am not certain if any of the US makers even offer factory ammo anymore. Starline has empty brass at a reasonable price and I need to stock up.

I don't have a photo handy, have not figured out how to post one here anyway.

Attached Files

gnoahhh posted this 01 October 2015

Off the wall and about as far as one can get from a .35 Remington: In 1962, at my Great Grandfather's estate auction, a Stevens M87 .22 autoloader w/Tenite stock came on the block. Gramps and Dad didn't have a clue as to when and where the Old Man acquired it, or that he even owned it. On top of that, the stock was broken in half through the wrist. My 9 year old self lobbied for that gun until finally my dad sent me on an errand to get me out of his hair. Upon arriving back I saw that the gun had come and gone through the auctioneers hands. Disappointment didn't begin to describe how I felt.

Two weeks later, my Gramps invited me out to his shop to lend a hand with a project he was working on. Lo and behold, there in his vice was that Stevens with the stock freshly repaired. He had glued it back together with epoxy and inlaid a big red plastic diamond over the break for added integrity. I think his face glowed as much as mine did as he handed it to me, with instructions I vaguely remember as words to the effect of “don't shoot your eye out, kid". He had paid $2.50 to win the gun at auction, as I found out later.

53 years later the stock is still in one piece and the gun gets a workout now and then, whether it needs it or not.

Attached Files

  • Liked by
  • M3 Mitch
bandmiller2 posted this 01 October 2015

I agree with what Ed said its a shame we don't know the history of some of the old used guns we buy. Too bad they didn't come with a log book. Years ago I was rummaging around the Kittery trading post in Maine and came upon a Winny 94 32 special. The gun showed a lot of blueing wear but the bore was crisp and clean. It had a Redfield receiver sight and a recoil pad to lengthen the stock. It was some ole boys pride and joy and used many years. Frank C.

Attached Files

oscarflytyer posted this 27 September 2015

Had a rem 336 and sold it to a buddy when I bought another I liked better. And also just picked up a Rem Mdl 14 in 35 Rem.

Attached Files

tturner53 posted this 26 September 2015

Anybody shot an elk with a .35 Remington? Me and JR. are going to Washington for an elk hunt! He's thinking of taking my Marlin. Is the Hornady tipped bullet really better? We're expecting heavy cover, short range stuff.

Attached Files

Ed Harris posted this 26 September 2015

Great story.

73 de KE4SKY In Home Mix We Trust From the Home of Ed's Red in "Almost Heaven" West Virginia

Attached Files

Pigslayer posted this 26 September 2015

Well, this doesn't concern a .35 Remington but I hope it qualifies for a “Fire Side Story". About fifteen years ago I was in a pawn shop looking around. One of those places that don't have a gun rack to display their rifles. They just put them in a corner with a locked chain through the trigger guard. I spied a Remington 760 in .270 caliber. It had the older aluminum buttplate. The bluing was in good shape but stock was scratched up & ill kept. Looked like someone used it for a crutch.  The extractor pin was broke & there was no clip. The rifling looked good. They wanted $275.00 for it & I wound up paying $175.00 after haggling. I ordered a new extractor pin from Brownell's & installed that. I scraped down the stock & cleaned up the checkering & gave it a new coat of finish.  The stock is actually a “curly” walnut. I found a set of scope mount bases at a local gun shop and ordered a new set of scope rings. I had a cheaper Bushnell Sportview 3 x 9 x 40mm scope new in the box laying around so I mounted that. At that time I wasn't equipped or inclined to shoot cast bullets in it so I loaded up my favorite jacketed load. 150 gr. Sierra Spitzer Boat tail, 54.4 grs. H4831 powder & CCI lge. rifle primer. I took the old girl to the range & in a short while I could cover 3 shots with a dime at 100 yds.. I contacted Remington as to the serial number & they said that it was made in 1954. I'm glad that I found it & brought it back to life. The “Old Girl” is back in service & putting meat on the table.

If someone else had of done to me what I did to myself . . . I'd have killed him. Humility is an asset. Heh - heh.

Attached Files

  • Liked by
  • M3 Mitch
M3 Mitch posted this 25 September 2015

I don't have a Marlin, but I do have a Remington Model 8 in .35 Remington, and a Model 760 pump as well. The 760 is early enough to have an aluminum butt plate. Both shoot at least OK, although as usual for me I have not done any formal accuracy testing.

Attached Files

oscarflytyer posted this 28 July 2015

Recently a big Marlin/Lever guy. got away from milsurps and transferred my OCD to levers! One of the first of these was/is a Marlin 336 in 35 Rem. Great gun and thumps a deer. But I am actually thinking of parting with it IF I get my hands on a Rem 141 in 35 Rem. Then take a Marlin 336 30-30 that has been desecrated (name engraved)and boring to 356 Win! Have my Marlin 1895 45-70. And a resurrected Glenfield Mdl 30 30-30 that is going to become a 38-55! Guess this is more of a Lever gun response than 35 Marlin - but the 35 Marlin was the second lever I got and I Love the levers!

Attached Files

olesmokey posted this 25 July 2015

Ken Waters has a chapter devoted to 35 Rem in Petloads. Its very informative. I have drooled on many .35 Marlins here. The price has really gone up on those old guns but they are so fine.

Attached Files

Ken Campbell Iowa posted this 14 June 2014

in excavating in my stash i noticed a sack labeled 35 rem. if anybody needs cases i will pull it out and see what they are. pm please.

i can now see someone waving a flashlight from clear across my shop !! stuff from the 70's is turning up !!

i got some 6.5 x 55 lapua cases i paid 20 cents for; wow.

ken

Attached Files

Ed Harris posted this 13 June 2014

My NOE mold for the 359-190RD in their plain based version, with conventional lube grooves and crimp grooves is a great performer for me in the 9mm Cowboy, .38/.357 and .35/30-30.

73 de KE4SKY In Home Mix We Trust From the Home of Ed's Red in "Almost Heaven" West Virginia

tturner53 posted this 13 June 2014

Congratulations! Good score. My 1971 .35 Rem. dearly loves the Ranch Dog 190 gr., both plain base and gas checked. Mine is a MG barrel. I think there are knock off copies of Ranch Dog designs available if you're interested from the outfit in Utah. Their quality is good.

Attached Files

Show More Posts
Close